AeroPress
AeroPress
Since 2005 · 21 years to 2026 · First made in Livermore, California
The AeroPress is a coffee maker in three parts of grey plastic: a wide cylindrical chamber marked with the numerals one to four, a narrower plunger with a soft rubber seal at its foot, and a perforated black cap that screws onto the bottom of the chamber and holds a small round paper filter. Set on a mug, filled with ground coffee and hot water, stirred and pressed, it works exactly like a syringe, and the whole brew takes about two minutes.
It was invented by Alan Adler, a Stanford engineering lecturer whose company had made its name with the Aerobie flying ring. Unhappy with the bitterness of his own coffee, he experimented with water temperature and brewing time, and found that a short steep pushed through a filter by air pressure gave a smooth cup. His company showed the result at a coffee trade fair in Seattle in November 2005, after production had begun that October in Livermore, California.
The coffee trade was at first inclined to dismiss it as a gadget from a toy company, but it gathered a following among enthusiasts, who prized its cheapness, its easy cleaning and the room it left for experiment. Baristas turned it upside down, ground finer, changed the dose and the timing, and in 2008 three of them met in Oslo for the first World AeroPress Championship, now a competition held in dozens of countries.
The brewer itself has changed only in its plastic. Clear polycarbonate gave way to copolyester in 2009 and to the present grey polypropylene in 2014, and the lettering has changed colour, but the chamber, plunger and filter cap are the same in shape and use as those of 2005. The company has since added larger, smaller and dearer versions; the original is still sold as the AeroPress Original.
Timeline
- 2005 First made · Verified AeroPress enters production in Livermore, California.
- 2008 Recognised The first World AeroPress Championship is held in Oslo, with three competitors.
- 2009 The clear polycarbonate is replaced by a copolyester free of BPA, and in 2014 by the grey polypropylene still used.
- 2021 Ownership The Canadian holding company Tiny takes a controlling stake in AeroPress, Inc.
Milestones as we found them, not as we've checked them.
From the archive
More like this
-
Coffee & Tea · since 2005 Hario V60 A laboratory funnel, given ribs and one large hole, that taught the world's baristas to pour. -
Coffee & Tea · since 1997 Rancilio Silvia Rancilio's café machine shrunk for the kitchen in 1997, revised six times and never replaced. -
Coffee & Tea · since 1991 Gaggia Classic A stainless-steel box with a café-sized portafilter, Gaggia's home espresso machine since 1991. -
Coffee & Tea · since 1980 Alessi 9090 Espresso Maker Richard Sapper's 'little steam engine': a steel cylinder on a flared base that opens with one hand, Alessi's first espresso maker.